.
+44 (0)1256 892194
viscosity measurement software
Accurate viscosity measurement is done with OBD Rotating Dip Sensors. The installation, made with a simple drilling in the main tank, guarantees flexibility, easy maintenance and cleaning, if necessary.
viscosity coatings and temperature control viscosity measurement test cups
Viscosity Test Cups
Viscosity Software
viscosity falling ball sensor
The ViscoStar falling ball sensor, a gravity-dependent device not powered like the rotational type sensors, utilises a falling ball located within a vile to measure time of fall.  Falling ball sensors, also  called “falling body sensors,” take multiple measurements and the time of fall frequency, is used to correspond with a measuring cup, such as a Ford 4 cup. Maintaining a clean measuring passage for the measuring ball to fall freely, is essential. With “falling ball” sensors, it is important to have both manual and auto-flush functions that clean the falling body mechanism with solvent. In addition, filters are highly recommended for this type of inline viscosity control device. The ViscoStar sensor fits best with the automatic Auto-Clean systems at printing stations Falling ball sensors  are used in combination with Multiplex FK systems and are able to control up to 8 stations, plus optionally rotating sensors, i.e. for coating stations
obd rotating dip viscosity sensor viscosity measurement test cups viscosity measurement test cups
Test cups are used to get initial information about viscosity values. Supplied in various designs and standards, for use in production, labs and other applications, they are simple to use for the approximate measurement of apparent viscosity values in a wide range of materials including paints, varnishes, lacquers, inks and other viscous products. Special cups for refractory coatings with enlarged volume for increased accuracy with extra long handles available on request.
viscosity measurement test cups
Rapid manual viscosity measurement Simple to use Any type of fluid Particularly suitable in the workshop
Multi VC 
OBD Rotating Dip Sensors
ViscoStar
Test cups
viscometer for viscosity measurement
ViscoLab VL 3001, rotational viscometer units, for viscosity measurement, evaluation, laboratory report requirements and offline applications. These units are available in different versions for quick measurements of dynamic viscosity based on well known standards and also for rheological evaluations and research tasks involving liquids and further processing of viscosity data.
ViscoLab VL 3001
Portable - VLP 1000
Rotating dip sensors for direct tank usage or with bypass installation Easy to install, maintain and operate High accuracy with motor in explosion-proof housing Cleaning with optional stainless steel sensor quivers
rotating dip viscosity sensor
Full digital control with extensive software and numerous adjustable parameters Scaling functions for best setting even with problematic or new inks and liquids RS-232, printer interface, oc-net functions, oc-3000 and oc-4000 software Multiplex FK units for use with 8 (9) sensors via only one control box Option: Temperature and pH-control channels
Junior VC 
Jenton International UK 9/10 Ardglen Industrial Estate, Evingar Road, Whitchurch, HAMPSHIRE  RG28 7BB  UNITED KINGDOM Tel:+44 (0)1256 892194            Fax:+44 (0)1256 896486               sales@jenton.co.uk
Jenton International is a part of the Jenton Group of companies specialising in the supply and support of technically innovative products for the Packaging, Banding, UV Curing, UV LED, UV Disinfection, Viscosity Control & Converting industries as well as the food automation packaging industry with Jenton-Ariana 
enton International Home Page viscosity control digital display units
To achieve fully automatic viscosity control of a production process, for printing, coating or other applications, Junior VC, fully digital automatic controls, offer an easy to use solution to control the viscosity of inks, coatings and other liquids measured by OBD or MTD sensors.                      The unit is designed as a control to be used in print and liquid media applications where viscosity data and valve timing control are essential to the process, with fully adjustable features and is popular for use in flexo and gravure printing.
Easy to install and operate Adjustment of setpoint with potentiometer or press button Valve control exit for solvent/water supply to control the viscosity Control box suitable for either wall mounting or panel installation Analogue control with +/- or digital display of actual value and setpoint
viscosity control digital display data

Test Cups, Sensors, Digital Display Units, Viscometers

ViscoLab Portable VLP 1000 is an easy to use rotational viscometer for manual usage  (mobile) in    standard applications. JENTON VISCOSITY CONTROL Home Products Events Enquiry Contact Blog Viscosity Control Installation Samples

Viscosity Measurement and Control Systems

Viscosity Sensors
Viscosity Temperature Control
VL 3002 for software and data evaluation:      RS232 serial interface for data transfer to connected PC using optional VS-Basic software or other suitable data recording program, for bi-directional usage with optional VS-Plus for remote-control or VL- functions, with additional speed settings for higher viscosity ranges
viscosity data evaluation
Fixed speed setting (model depending) to 60 rpm  Standard set R2-R7 (R1 optionally available),viscosity range about 66-66.000 mPas Optional R1 spindle for ranges about 16-166 mPas Battery usage up to 24 h activation Precision: +/- 2 % of full scale range
.
Accurate viscosity measurement is done with OBD Rotating Dip Sensors. The installation, made with a simple drilling in the main tank, guarantees flexibility, easy maintenance and cleaning, if necessary.
The ViscoStar falling ball sensor, a gravity- dependent device not powered like the rotational type sensors, utilises a falling ball located within a vile to measure time of fall.  Falling ball sensors, also  called “falling body sensors,” take multiple measurements and the time of fall frequency, is used to correspond with a measuring cup, such as a Ford 4 cup.
obd rotating dip viscosity sensor
Test cups, used to get initial information about viscosity values, are supplied in various designs and standards, for use in production, labs and other applications. They are simple to use for the approximate measurement of apparent viscosity values in a wide range of materials including paints, varnishes, lacquers, inks and other viscous products.
viscosity measurement test cups viscosity measurement test cups
Rapid manual viscosity measurement Simple to use Any type of fluid Particularly suitable in the workshop
OBD Rotating Dip Sensors
ViscoStar
Test cups
viscometer for viscosity measurement viscosity measurement test cups
ViscoLab VL 3001, rotational viscometer units, for viscosity measurement, evaluation, laboratory report requirements and offline applications. These units are available in different versions for quick measurements of dynamic viscosity based on well known standards and also for rheological evaluations and research tasks involving liquids and further processing of viscosity data.
ViscoLab VL 3001
Portable - VLP 1000
Rotating dip sensors for direct tank usage Or with bypass installation Easy to install, maintain and operate High accuracy with motor in explosion-proof housing Cleaning with optional stainless steel sensor quivers
rotating dip viscosity sensor
Full digital control with software and adjustable parameters Scaling functions for best setting with new inks and liquids RS-232, printer interface oc-net functions, oc-3000 and oc-4000 software Multiplex FK units used with 8 (9) sensors via one control box Option: Temperature and pH-control channels
Junior VC 
To achieve fully automatic viscosity control of a production process, for printing, coating or other applications, Junior VC, fully digital automatic controls, offer an easy to use solution to control the viscosity of inks, coatings and other liquids measured by OBD or MTD sensors.                      The unit is designed as a control to be used in print and liquid media applications where viscosity data and valve timing control are essential to the process, with fully adjustable features and is popular for use in flexo and gravure printing.
viscosity control digital display units
Easy to install and operate Adjustment of setpoint with potentiometer or press button Valve control exit for solvent/water supply to control viscosity Control box suitable for wall mounting or panel installation Analogue control with +/- Or digital display of actual value and setpoint
viscosity control digital display data

Test Cups, Sensors, Digital Display Units, Viscometers

viscosity test cups
Viscosity Test Cups
viscosity measurement and control software
 Viscosity Control Software
viscosity coatings and temperature control units
Viscosity Temperature Control
viscosity measurement sensors
Viscosity Sensors
Special cups for refractory coatings with enlarged volume for increased accuracy with extra long handles available on request.
viscosity falling ball sensor
Maintaining a clean measuring passage for the measuring ball to fall freely, is essential. The ViscoStar sensor fits best with the automatic Auto-Clean systems at printing stations Falling ball sensors  are used in combination with Multiplex FK  systems and are able to control up to 8 stations, plus optionally rotating sensors, i.e. for coating stations.
.
JENTON VISCOSITY CONTROL Menu
Capability in Viscosity Measurement and Control
Viscosity Control Installation Samples
Fixed speed setting (model depending) to 60 rpm  Standard set R2-R7 (R1 option available),viscosity range about 66-66.000 mPas
ViscoLab Portable VLP 100 is an easy to use rotational viscometer for manual (mobile) usage in standard applications.
portable viscometer for viscosity measurement
Optional R1 spindle for ranges about 16-166 mPas Battery usage up to 24 h activation Precision: +/- 2 % of full scale range

Viscosity Measurement and Control Systems

VL 3002 for software and data evaluation:      RS232 serial interface for data transfer to connected PC using optional VS-Basic software or other suitable data recording program, for bi-directional usage with optional VS-Plus for remote-control or VL- functions, with additional speed settings for higher viscosity ranges
viscosity data evaluation